Products

Stainless-steel electrodes

The electrodes of this group are used for welding stainless steels. Stainless steels are used in cases where corrosion resistance and resistance to high temperatures are required. 3xx and 4xx series are among the most widely used stainless steels. Series 3 stainless steels with chromium and nickel alloy elements have austenitic structure and are not […]

Wires and Branches of Carbon Steel and Low Alloy

The products in this category are used for welding simple carbon steels (SG) and welding low alloy steels (80S-120S). Welding wire or welding branch ER70S-3 is used in both single-pass and multiple-pass modes and is used for welding killed, half-killed and homogenized steels. Due to the relatively strong oxidizing properties of this product, welding of […]

Wires and Branches of Stainless-steel

  Wires and branches of stainless steel are used for GMAW and GTAW welding, respectively. The products of this group have the same composition and application as stainless-steel electrodes, with the difference that the products of this group have no coating and shielding gas is used to protect against welding. Welding wires and branches of […]

Wires and Branches of Aluminum-base Alloy

The products of this group have the same composition and application as the aluminum base electrodes, with the difference that the products of this group have no coating and shielding gas is used to protect against welding. The main alloying element in the 5XXX group is magnesium. This group of alloys has moderate strength, but […]

Flux Cored Arc for welding soft steels, heat resistant steels and low temperature steels

Soft Steels: The minimum tensile strength of the weld metal created by the alloy welding wires provided for welding mild steels is 70,000 psi. – E70T-1 powder welding wire is used for flat and horizontal welding. This product is used to connect simple carbon steels and low alloy steels. – E71T-1 powder welding wire, which […]

Submerged Arc Welding of Carbon Steels and Low Alloy Steels

These products are used for welding carbon steels and low alloy steels by SAW method. High deposition rate, high welding depth, ability to weld thick steel sheets, low distortion and ability to weld in open environments are the advantages of the submerged arc welding method, which is the method for welding thick steel sheets, pipe- […]

Stainless Steel Submerged Wires

These products are used for welding and joining large parts of stainless steel. Stainless steel subwoofers are similar to stainless steel wires used in the GMAW process, except that flux is used to protect them instead of shielding gas. – ER308L: Suitable for welding austenitic stainless steel type 304 and L304. This product is suitable […]

Cast Iron Electrodes

The choice of electrode for welding gray cast iron, in addition to the fact that the welding will be single-pass or multi-pass, requires consideration of the cost and machinability parameters. The ENi-Cl electrode nominally contains 98% nickel. This electrode is considered an expensive electrode due to the high percentage of nickel, but the use of […]

Surface Hardening Electrodes

The electrodes of this group are used for surface hardening and repair of parts. In most industries, metal parts undergo various abrasion processes. The created abrasion changes the dimensions, slows down and reduces the efficiency of the metal part. Since the replacement of these parts requires a lot of costs, in order to reduce costs, […]