SUPERMIG 410 is a ER410/G13 type solid MAG welding wire supplied precision layer wound, depositing a C-13%Cr weld metal. Suitable for use with Ar-CO2 mix shielding gases. SUPERMIG 410 is mainly used for deposition of overlays on carbon steels to resist corrosion, erosion or abrasion.
SUPERTIG 410 is a ER410/G13 type solid TIG welding wire depositing a C-13%Cr weld metal. Suitable for use with Ar-CO2 mix shielding gases. SUPERTIG 410 is mainly used for deposition of overlays on carbon steels to resist corrosion, erosion or abrasion.
Application
- Surfacing Steel Mill Rolls
- Furnace and Burner Parts
- Turbine Parts
- ER-410 Electrode is used for welding type 405,410,414 and 416.
- Also, an overlay on cs for corrosion, abrasion and erosion resistance.
Features
- Welds alloys of similar composition
- Used as overlay on carbon steels
- Increased resistance to corrosion, erosion or abrasion
- Requires preheat and post heat treatment
- One-year warranty
- Embossed on each end for easy identification after use
Specifications
- Chemical Composition: Carbon 0.12% max.,Nickel 0.60%,Copper 0.75% max.,Phosphorus 0.03% max.,Molybdenum 0.75% max.,Chromium 11-5-13.5%,Manganese 0.60%,Silicon 0.5%,Sulfur 0.03% max.,Iron Remainder%
- 89,000 psi tensile strength (as welded)
- 59,000 psi yield strength (as welded)
- 24% elongation (as welded)
Caution
All parameters are suggested as basic guidelines and will vary depending on joint design, number of passes and other factors.
410NiMo STAINLESS STEEL FILLER WIRE
SUPERMIG 410NiMo is a solid MAG welding wire supplied precision layer wound depositing a C-12Cr4Ni0.5Mo weld metal suitable for use with Ar-Co2 mix shielding gases. It is used for the welding of high strength martensitic steels, with excellent resistance to corrosion, hydro cavitation & sulphide induced stress corrosion cracking, Good subzero notch toughness properties.
SUPERTIG 410NiMo is a TIG rod suitable for welding AISI 410 NiMo. These are self- hardening steels and usually require pre-heating and stress relieving treatments in order to obtain adequate joint ductility. SUPERTIG 410NiMo is used primarily to weld cast and wrought material of similar chemical.
Features
410NiMo stainless steel wires are designed for welding in all positions with Argon/CO2 gas mixtures or 100% CO2. These wires exhibit a spray like arc transfer, easy slag removal and can be welded within a wide range of parameters.
410NiMo T-1 AP wires can be used to join martensitic stainless steels such as type 410 used in valve and pump manufacturing. These wires can also be used for the repair and joining of ACICA6NM castings. AWS Classification: A5.22 E410NiMoT1-1/-4.
Applications
High strength (>760MPa) martensitic stainless steel with better resistance to corrosion, hydro-cavitation, sulphide-induced SCC, and good sub-zero toughness when compared with plain 12%Cr steels (e.g. type 410/CA15).
Weld metal of this type greatly overmatches the strength of equivalent parent material and is remarkably resistant to softening during PWHT.
These properties can be exploited for welding martensitic precipitation-hardening alloys if corrosion conditions are compatible with lower alloy weld metal, with the advantage of a single PWHT at 450-620ºC for tempering. The 410NiMo consumables are also used for overlaying mild and CMn steels.
13%Cr-4%Ni alloys are used in cast or forged form for hydraulic turbines, valve bodies, pump bowls, compressor cones, impellers and high-pressure pipes in power generation, offshore oil, chemical and petrochemical industries.
